Berkey® Inline Shower Filter With 6 Spray Shower Head
Berkey® 6-Spray Shower Head
Usage and Cleaning
Turn shower head face in either direction to change spray pattern. To clean, periodically wipe shower head with warm water and mild soap. Rinse well and pat with soft cloth to dry. Never use harsh abrasive cleaners, as they may damage the shower head’s chrome finish.
Precautions
- Installation of shower head
must comply with state and local
plumbing codes - Do not use when line pressure
exceeds 80 psi (5.5 bar) or water
temperature exceeds 104° F (40° C) - To improve seal, wrap plumber’s
tape (not included) clockwise several
times around shower arm threads
before connecting shower head
Specifications
- 6 spray settings
- Rated service flow:
2 gallons (7.6L) per minute - Dimensions: diameter: 4.1″
(105mm) x D: 2.8″ (70mm) - Operating pressure:
20-80 psi (1.4-5.5 bar) - Operating temperature range:
40°-104° F (4°-40° C)
Promote healthy skin and hair. Feel refreshed. Reduce up to 98% of harsh chlorine, which can damage delicate skin and hair. Berkey® Easy-Replace Shower Filter Cartridges inhibit bacterial growth, and reduce heavy metals, algae, scale, and sediment in your water, improving water and vapor quality.
Keep the shower head you enjoy. Replace cartridge annually with less hassle. The Berkey® Inline Shower Filter fits standard ½” plumbing fixtures. Connect it between the shower arm and most shower heads (not included). Berkey® Easy-Replace Shower Filter Cartridges can be swapped out by hand in mere moments, and last up to 30,000 gallons or approximately 1 year with typical use.
Specifications:
- SKU: W01BERKEY
- Chrome finish
- BPA free
- Universal ½” fittings
- Rated service flow:
2.5 gallons (9.5 liters) per minute - Lifespan:
up to 30,000 gallons (113,400 liters) / 1 year - Overall dimensions:
H: 5.1″ (128.25mm) x W: 3.5″ (86.75mm) x D: 5.1″ (129mm) - Housing cover:
H: 3.9″ (98mm) x diameter: 3.6″ (89.50mm) - Operating pressure:
20 – 100 psi (1.4 – 6.9 bar) - Operating temperature range:
40° – 120° F (4° – 48.9° C) - Optimal pH range: 6.5 – 8.5
Precautions:
- Lifespan of shower filter cartridge is dependent
on the quality of influent water - Water filtered by shower filter cartridge is not
advised for drinking water purposes - Installation of shower filter must comply with
state and local plumbing codes - A shut-off valve is not advised to be used with the
shower filter - Do not use when line pressure exceeds 100 psi (6.9 bar)
- Do not exceed 120° F (48.9° C)
- Do not install in direct sunlight
- Protect from freezing
Included in the box:
● Filter cartridge
● Cartridge housing
● Plumbing plate
● Rubber washer
● Plumber’s tape
● Instructions
IMPORTANT! Flush Cartridge Before First Use
To prevent stains, flush the cartridge to clear excess carbon. After installing, point shower head
toward non-porous shower wall. Turn on water. Run until water runs clear (about 3-5 minutes).
